Switch – TECHNOLOGIES FOR ALL https://tech-for-all.net Mon, 30 Dec 2024 05:56:07 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://tech-for-all.net/wp-content/uploads/2024/12/cropped-favicon-2-32x32.png Switch – TECHNOLOGIES FOR ALL https://tech-for-all.net 32 32 CCR2004-16G-2S+ https://tech-for-all.net/product/ccr2004-16g-2s/ Sat, 05 Oct 2024 12:19:55 +0000 https://tech-for-all.net/?post_type=product&p=3275 Specifications
Details
Product code CCR2004-16G-2S+
Architecture ARM 64bit
CPU AL32400
CPU core count 4
CPU nominal frequency 1700 MHz
Switch chip model 88E6191X
Dimensions 443 x 210 x 44 mm
RouterOS license 6
Operating System RouterOS v7
Size of RAM 4 GB
Storage size 128 MB
Storage type NAND
MTBF Approximately 200’000 hours at 25C
Tested ambient temperature -20°C to 60°C
IPsec hardware acceleration Yes
Suggested price $465.00

Powering

Details
Number of AC inputs 2
AC input range 100-240
Number of PSU slots 2
Frequency (Hz) 50-60
Max power consumption 48 W
Max power consumption without attachments 35 W
Cooling type 2 fans

Ethernet

Details
10/100/1000 Ethernet ports 16

Fiber

Details
SFP+ ports 2

Peripherals

Details
Serial console port RJ45

Other

Details
CPU temperature monitor Yes
PCB temperature monitor Yes
Voltage Monitor Yes
]]>
CRS320-8P-8B-4S+RM https://tech-for-all.net/product/crs320-8p-8b-4srm/ Mon, 23 Sep 2024 09:49:58 +0000 https://tech-for-all.net/?post_type=product&p=3235 Specifications
Details
Product code CRS320-8P-8B-4S+RM
Architecture ARM 32bit
CPU 98DX226S
CPU core count 2
CPU nominal frequency 800 MHz
Switch chip model 98DX226S
RouterOS license 5
Operating System RouterOS v7
Size of RAM 256 MB
Storage size 32 MB
Storage type FLASH
MTBF Approximately 200’000 hours at 25C
Tested ambient temperature -10°C to 50°C
Suggested price $489.00

Powering

Details
Number of AC inputs 1
AC input range 100-240
Number of PSU slots 2
Frequency (Hz) 50-60
Max power consumption 600W (1150W with additional PSU)
Max power consumption without attachments 36 W
Cooling type 3 fans

PoE-out

Details
PoE-out ports Ether9-Ether16 (bt)
PoE out 802.3af/at/bt
Max out per port output (input 30-57 V) 560 (af/at) / 1667 (bt) mA
Max total out (A) 17.82 A
Total output current 17.82
Total output power 963

Ethernet

Details
10/100/1000 Ethernet ports 17
Number of 1G Ethernet ports with PoE-out 16

Fiber

Details
SFP+ ports 4

Peripherals

Details
Serial console port RJ45

Other

Details
CPU temperature monitor Yes
PCB temperature monitor Yes
Voltage Monitor Yes
]]>
S310-24P4S Huawei https://tech-for-all.net/product/s310-24p4s-huawei/ Sun, 14 Jul 2024 10:17:44 +0000 https://tech-for-all.net/?post_type=product&p=2896 Specifications

Dimensions without packaging (H x W x D) [mm(in.)] Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)

Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.)
Chassis height [U] 1 U
Chassis material Metal
Weight without packaging [kg(lb)] 2.92 kg (6.44 lb)
Weight with packaging [kg(lb)] 3.79 kg (8.36 lb)
Typical power consumption [W] 40.07 W
Typical heat dissipation [BTU/hour] 136.72 BTU/hour
Maximum power consumption [W]
  • Without PoE: 47.1 W
  • Full PoE load: 491.66 W (PoE: 400 W)
Maximum heat dissipation [BTU/hour]
  • Without PoE: 160.71
  • Full PoE load: 1677.59
Static power consumption [W] 30.82 W
MTBF [years] 60.18 years
MTTR [hours] 2 hours
Availability > 0.99999
Noise at normal temperature (acoustic power) [dB(A)] 49.3 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)] 37.3 dB(A)
Number of card slots 0
Number of power slots 0
Number of fans modules 2
Switching capacity To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Packet forwarding rate To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Uplink ports 4 x GE SFP ports
Downlink ports 24 x 10/100/1000BASE-T ports (400 W, PoE+)
Redundant power supply Not supported
Long-term operating temperature [°C(°F)] -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)
Restriction on the operating temperature variation rate [°C(°F)] When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.)
Power supply mode AC built-in
Rated input voltage [V]
  • AC input: 100 V AC to 240 V AC, 50/60 Hz
  • High-voltage DC input: 240 V DC
Input voltage range [V]
  • AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz
  • High-voltage DC input: 190 V DC to 290 V DC
Maximum input current [A] 6 A
Memory 2 GB
Flash memory Physical space: 1 GB
Console port RJ45
Eth Management port Not supported
USB Not supported
RTC Not supported
RPS input Not supported
Service port surge protection [kV] Common mode: ±7 kV
Power supply surge protection [kV] Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection level (dustproof/waterproof) IP20
Types of fans Built-in
Heat dissipation mode Air cooling for heat dissipation, intelligent fan speed adjustment
Airflow direction Air intake from left and front, air exhaustion from right
PoE Supported
Certification EMC certification

Safety certification

Manufacturing certification

]]>
Cisco Switch 24P SF100 https://tech-for-all.net/product/cisco-switch-24p-sf100/ Sat, 13 Jul 2024 11:56:42 +0000 https://tech-for-all.net/?post_type=product&p=2859 Specifications

Key Features

  • Twenty-Four (24) 10/100 fast Ethernet ports with automatic medium dependent interface (MDI) and MDI crossover (MDI-X); auto negotiated port for connecting
  • Energy Efficient Ethernet (IEEE 2402.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link
  • Rackmount 1U form factor that offers a data cabinet or wall-mount cabinet option for integration in to an existing network.
  • Includes advanced Cisco traffic-handling features to keep your applications running at peak performance
  • Integrated QoS intelligence on the switch automatically prioritises delay-sensitive services such as voice or video
  • Works right out of the box, with no software to install and nothing to configure.

High performance
The Cisco SF100-24 switch delivers the performance you need to run your business applications – including bandwidth-intensive video services – and avoid slow and sluggish networks. It supports up 10/100 Ethernet speeds, unlocking a new level of capacity and performance in your business network and letting you transfer large files in seconds.

Reduced energy costs
The Cisco SF100-24 switch is designed to help conserve energy by optimising power use without compromising performance, which protects our environment and reduces your energy costs. In addition, they support the Energy Efficient Ethernet (IEEE 2402.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods. Most of the switches have no fans, so they run silently and unobtrusively while lowering energy costs.

Support for advanced technologies
This Cisco SF100-24 switch includes advanced Cisco traffic-handling features to keep your applications running at peak performance. Integrated QoS intelligence on the switch automatically prioritises delay-sensitive services such as voice or video to improve your network’s performance. Fast store-and-forward switching identifies damaged packets and prevents them from being passed on through the network. All of these features run automatically, with no management or configuration required.

Peace of mind
Every Cisco 100 Series switches deliver the rock-solid reliability you expect from a Cisco switch. The solution has been rigorously tested to ensure optimal uptime and performance. In addition, unlike the purchase of a consumer-grade product, your investment in a Cisco Small Business network will grow with your business.

Ease of use
A Cisco SF100-24 switch works right out of the box, with no software to install and nothing to configure. Each switch port independently sets itself for the optimal speed and determines whether to run in half- or full-duplex mode automatically. As a standards-based Cisco solution, this Cisco SF100-24 switch is also designed to immediately accommodate all of the devices in your network, including:

  • Support for 10 megabits per second (Mbps), 100 Mbps, and up to 1 gigabit per second (1000 Mbps) devices in the same network (Gigabit devices plugged in to the Cisco SF100-24 will work at a 10/100 speed)
  • Automatic cable detection, so you don’t have to worry about using the wrong cable type
  • Compatibility with network devices from other vendors
]]>
Cisco Switch 16P SF110 https://tech-for-all.net/product/cisco-switch-16p-sf110/ Sat, 13 Jul 2024 11:39:11 +0000 https://tech-for-all.net/?post_type=product&p=2853 Specifications

Affordable, Easy-to-Use Switches for Small Business Networks, with Zero Configuration Required

Give your office network a boost of speed and performance at a low price that takes almost no time to set up. Easily build a highly reliable network to connect your computers, printers, copiers, and other office equipment. If your business is like most small companies, you do not have an IT staff to set up your network for you. Now you can have a high-performance, business-class office network that just works, right out of the box, with the Cisco 110 Series Unmanaged Switches. Users, workgroups, labs, departments, or growing offices can now deliver large amounts of multimedia, image, and video information across the network in almost no time.

Cisco 110 Series Unmanaged Switches deliver basic network connectivity and reliability for small businesses that is easy on the budget and without all the complexity. These switches provide all of the features, expandability, and investment protection you expect from Cisco, with no installation software and nothing to configure. Just plug it in, connect your computers and other business equipment, and get to work.

Cisco 110 Series Unmanaged Switches, part of the Cisco Small Business networking solutions, are a line of unmanaged switches that provide wire-speed Fast Ethernet and Gigabit Ethernet connectivity to connect your small business office. Available in desktop and rack-mount models, these switches are designed to suit any office space with basic network needs and to optimize power efficiency. They use less power and provide the robust, reliable connectivity your business demands, as well as support for advanced features such as quality of service (QoS), loop detection, and cable diagnostics, all in a switch that you can set up yourself in minutes. A business-class, affordable network solution, Cisco 110 Series switches bring the proven reliability and investment protection of Cisco networking solutions to your small business.

]]>
netFiber 9 https://tech-for-all.net/product/netfiber-9-2/ Wed, 12 Jun 2024 11:26:13 +0000 https://tech-for-all.net/?post_type=product&p=2776 Specifications
Details
Product code CRS310-1G-5S-4S+OUT
Architecture ARM 32bit
CPU 98DX226S
CPU core count 1
CPU nominal frequency 800 MHz
Switch chip model 98DX226S
RouterOS license 5
Operating System RouterOS v7 / SwitchOS
Size of RAM 256 MB
Storage size 16 MB
Storage type FLASH
MTBF Approximately 200’000 hours at 25C
Tested ambient temperature -40°C to 70°C
Suggested price $249.00

Powering

Details
Number of DC inputs 2 (PoE-IN, DC jack)
DC jack input Voltage 18-57 V
Max power consumption 16.3 W
Max power consumption without attachments 10 W
Cooling type Passive
PoE in 802.3af/at
PoE in input Voltage 18-57 V

Ethernet

Details
10/100/1000 Ethernet ports 1

Fiber

Details
SFP ports 5
SFP+ ports 4

Peripherals

Details
Serial console port RJ45

Other

Details
CPU temperature monitor Yes
Voltage Monitor Yes
]]>
CSS610-8G-2S+IN https://tech-for-all.net/product/css610-8g-2sin/ https://tech-for-all.net/product/css610-8g-2sin/#respond Thu, 14 Mar 2024 14:37:31 +0000 https://tech-for-all.net/?post_type=product&p=2503 Specifications
Details
Product code CSS610-8G-2S+IN
Switch chip model 88E6193X
Dimensions 200 x 164 x 44 mm
Operating System SwitchOS Lite
Storage size 64 KB
Storage type FLASH
MTBF Approximately 200’000 hours at 25C
Tested ambient temperature -20°C to 60°C
Suggested price $119.00

Powering

Details
Number of DC inputs 2 (DC jack, PoE-IN)
DC jack input Voltage 12-57 V
Max power consumption 11 W
Max power consumption without attachments 5 W
Cooling type Passive
PoE in Passive PoE
PoE in input Voltage 12-57 V

Ethernet

Details
10/100/1000 Ethernet ports 8

Fiber

Details
SFP+ ports 2
]]>
https://tech-for-all.net/product/css610-8g-2sin/feed/ 0
USW-Flex https://tech-for-all.net/product/usw-flex/ https://tech-for-all.net/product/usw-flex/#respond Thu, 01 Feb 2024 11:07:52 +0000 https://tech-for-all.net/?post_type=product&p=2470 (4) GbE PoE+ ports
(1) GbE PoE++ input port for power
46W PoE availability* PoE++ input
20W PoE availability PoE+ input
8W PoE availability PoE input
Indoor/Outdoor
]]>

Specification

Mechanical
Dimensions 122.5 x 107.1 x 28 mm (4.8 x 4.2 x 1.1″)
Weight 230 g (8.1 oz)
Hardware
Management interface Ethernet In-Band
Networking interface (5) GbE RJ45 ports
PoE interface (4) PoE+ (Pins 1, 2+; 3, 6-)
Total non-blocking throughput 5 Gbps
Switching capacity 10 Gbps
Power method PoE++
Power supply PoE/PoE+ (Pins 1, 2+; 3, 6-)
PoE++ (Pins 1, 2+; 3, 6- and 4, 5+; 7, 😎
50V/60W PoE adapter (Not included)
Supported voltage range PoE: 44—57V DC
PoE+/PoE++: 50—57V DC
Max. power consumption 5W (Excluding PoE output)
Total available PoE 46W*
*When powered with a PoE++ switch or a 60W PoE adapter (Sold separately).
Max. PoE wattage per port by PSE 25W
ESD/EMP protection Air/contact: ± 16kV
Button Factory reset
Operating temperature 46W PoE output: -40 to 55° C (-40 to 131° F)
25W PoE output: -40 to 65° C (-40 to 149° F)
Operating humidity 5 to 95% noncondensing
Certifications CE, FCC, IC
LEDs
System Status
Ethernet PoE
Speed/link/activity
PoE Link/activity
Application Requirements
UniFi Network Version 5.10.3 and later

 

]]>
https://tech-for-all.net/product/usw-flex/feed/ 0
USW-Lite-8-POE https://tech-for-all.net/product/usw-lite-8-poe/ https://tech-for-all.net/product/usw-lite-8-poe/#respond Mon, 11 Sep 2023 14:17:43 +0000 https://tech-for-all.net/?post_type=product&p=2282 An 8-port, Layer 2 PoE switch supporting silent fanless cooling (4) GbE PoE+, (4) GbE ports 52W total PoE availability Wall mountable]]>

 Specifications

Mechanical
Dimensions 99.6 x 163.7 x 31.7 mm (4 x 6.4 x 1.3″)
Weight 295 g (10.4 oz)
Enclosure material Plastic
Hardware
Management interface Ethernet In-Band
Networking interface (8) GbE RJ45 ports
PoE interface (4) PoE/PoE+ (Pins 1, 2+; 3, 6-)
Total non-blocking throughput 8 Gbps
Power method 54V DC, 1.1A power adapter
Power supply 54V, external, 60W
Supported voltage range 50—57V DC
Max. power consumption 8W (Excluding PoE output)
Total available PoE 52W*
*With an external 60W power adapter.
Max. PoE wattage per port by PSE PoE+: 30W
Button Factory reset
Operating temperature -15 to 40° C (5 to 104° F)
Operating humidity 10 to 90% noncondensing
Certifications CE, FCC, IC
LEDs
System Status
Ethernet PoE
Speed/link/activity
Application Requirements
UniFi Network Version 7.2.94 and later
]]>
https://tech-for-all.net/product/usw-lite-8-poe/feed/ 0
ERPro-8 https://tech-for-all.net/product/erpro-8/ https://tech-for-all.net/product/erpro-8/#respond Tue, 10 Jan 2023 09:34:22 +0000 https://tech-for-all.net/?post_type=product&p=1791 Specifications

Interface Description
Console
RJ45 serial console port for Command
Line Interface (CLI) management. Use an
RJ45-to-DB9, serial console cable, also
known as a rollover cable, to connect the
Console port to your computer. (If your
computer does not have a DB9 port, then
you will also need a DB9 adapter.) Then
configure the following settings as needed:
• Baud rate 115200
• Data bits 8
• Parity NONE
• Stop bits 1
• Flow control NONE

USB Reserved for future use.
RJ45(eth0-eth7)
RJ45 ports support 10/100/1000 Ethernet
connections. RJ45 port eth6 or eth7 is
active only if the corresponding SFP port
is empty.
SFP
(eth6-eth7)
SFP ports are hot-swappable and support
100 Mbps or Gigabit fiber SFP modules. If
an SFP module is plugged in, then the SFP
port is active, and the corresponding RJ45
port is deactivated.

 

 

]]>
https://tech-for-all.net/product/erpro-8/feed/ 0