Technical Specifications

Mechanical
Dimensions	212 x 205 x 187 mm (8.3 x 8.1 x 7.4″)
Weight	2.3 kg (5.07 lb)
Enclosure materials	Aluminum alloy, UV stabilized polycarbonate
Pole mount diameter	25 to 76 mm (1 to 3″) on pipe outer diameter
Wind loading	98 N at 200 km/h (22 lbf at 125 mph)
Weatherproofing	IPX6
Hardware
Processor	Quad ARM® Cortex®-A53 cores at 1.4 GHz
Memory	DDR3L 512 MB
Networking interface	(1) 2.5GbE RJ45 port (100/1000/2500)* (1) 10G SFP+ port (1/10) * Active only when SFP+ port is down.
Max. power consumption	24W
Power method	Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply	48V DC, 0.65A 2.5GbE PoE adapter (included)
Supported voltage range	44–54V DC 22–27V DC
GPS	Yes
Button	Factory reset
LEDs	Power, Ethernet, GPS
Operating temperature	-40 to 60° C (-40 to 140° F)
Operating humidity	5 to 95% noncondensing
Certifications	FCC, IC, CE
Software
Operating mode	PtMP access point
Ubiquiti specific features	Wave technology
Services	UISP, ping watchdog, NTP client, SNMP
Tools	Antenna alignment, discovery utility, ping, trace route, speed test
Network	Bridge mode
Application requirements	UISP: Version 1.5.7 and later
System
Total throughput	5.4 Gbps (2.7 Gbps duplex)
Supported clients count	15
Max. range	Connecting to a Wave Long-Range: up to 8 km Connecting to a Wave Nano: up to 5 km
Encryption	WPA2-PSK (AES)
RF
Operating frequency*	57–71 GHz *Depends on regulatory region.
Channel bandwidth	2160, 1080 MHz
Operating channels*	58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz *Depends on regulatory region.
Modulation	16QAM, QPSK
Antenna gain	24 dBi
Polarization	Vertically linear
Beamwidth	Azimuth: 3 dB 30° Elevation: 3 dB 3°
Electrical downtilt	0°

 Specifications

Mechanical
Dimensions	Ø424.4 x 166.2 mm (Ø16.7 x 6.5″)
Weight	Without mount: 2.59 kg (5.7 lb) With mount: 3.79 kg (8.4 lb)
Enclosure material	UV stabilized plastic
Mount material	Stainless steel
Pole mount diameter	25 to 76.2 mm (1 to 3″) on pipe outer diameter
Wind loading	286 N at 200 km/h (64.3 lbf at 125 mph)
Weatherproofing	IPX6
Hardware
Processor	Dual ARM® Cortex®-A53 cores at 1 GHz
Memory	DDR3L 512 MB
Networking interface	(1) GbE RJ45 port
Max. power consumption	20W
Power method	Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply	48V DC, 0.65A gigabit PoE adapter (included) Can be powered by a UISP Router or UISP Switch
Supported voltage range	44–54V DC 22–27V DC
GPS	Yes
Button	Factory reset
LEDs	Power, Ethernet, GPS, link
Operating temperature	-40 to 60° C (-40 to 140° F)
Operating humidity	5 to 95% noncondensing
Certifications	FCC, IC, CE
Software
Operating mode	PtMP station
Ubiquiti specific features	Wave AI, discovery protocol
Services	UISP, ping watchdog, NTP client, SNMP
Tools	Antenna alignment, discovery utility, ping, trace route, speed test
Network	Bridge/Router mode
Application requirements	UISP: Version 1.4.5 and later
System
Total throughput	2 Gbps (1 Gbps duplex)
Max. range	8+ km
Encryption	WPA2-PSK (AES)
RF
Operating frequency*	57–71 GHz *Depends on regulatory region.
Channel bandwidth	2160, 1080 MHz
Operating channels*	58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz *Depends on regulatory region.
Modulation	16QAM, QPSK
Antenna gain	46 dBi
Polarization	Vertically linear
Beamwidth	Azimuth: 3 dB 1° Elevation: 3 dB 1°
Back-Up RF
WiFi standard	802.11ax (WiFi 6)
Operating frequency* US/CAWorldwide	U-NII-1 5150 – 5250 MHz U-NII-2A 5250 – 5350 MHz U-NII-2C 5470 – 5725 MHz U-NII-3 5725 – 5850 MHz5150 – 5875 MHz *Depends on regulatory region.
Channel bandwidth	20, 40, 80 MHz
Modulation	BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
Antenna gain	22 dBi
Polarization	Dual-linear
Beamwidth	Azimuth: 3 dB 8° Elevation: 3 dB 8°
Cross-pol isolation	20 dB

Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference.

Dimensions                              316.5 x 316.5 x 174.3 mm
(12.46 x 12.46 x 6.86″)

Weight                                      1.3 kg (2.87 lb)

Networking Interface                (1) 10/100/1000 Ethernet Port

Enclosure                                 Outdoor UV Stabilized Plastic

Max. Power Consumption       9W

Power Supply                          24V, 0.5A Gigabit PoE Adapter (Included)

Power Method                        24V Passive PoE (Pairs 4, 5+; 7,

Voltage Range                        22 – 26V

Max. Conducted TX              22 dBm (per Chain)
Power

Gain                                      24 dBi

Beamwidth                            14°

Sidelobe Level                      -10 dB

Front-to-Back Ratio                27 dB

High Performance, Long Range
Seamlessly Integrates with Rocket Radio
Excellent Cross-Polarization Isolation

Sector  SJ  5 GHz, 120º, 19 dBi Antenna , Point-to-MultiPoint (PtMP)5G

With SMA TO SMA

Mimosa C5x (100-00085) is the industry’s most versatile, modular, radio solution with five gain options (8, 12, 16, 20 and 25 dBi). The ultra-rugged solution provides extended frequency operation from 4.9–6.4 GHz, with best-in-class noise immunity. Delivering the ultimate in flexibility and value, the C5x is the go-to solution for 5 GHz deployments. Out of the box, the C5x can be used in PTMP mode, with Ethernet link speeds of up to 100 Mbps. 8-Pack

Product Features
• Four Twist-On, Flexible Antenna Options
• PTP or PTMP Modes (feature key may be required)
• Extended Frequency 4.9–6.4 GHz
• Best-in-Class Noise Immunity
• Ultra Rugged
• Low-Power Consumption
• Ultra Reliable
• Gigabit Ethernet: 10/100/1000-Base-T
• Management Services: Mimosa cloud monitoring and management; SNMPv2 & Syslog monitoring; HTTPS; HTML5-based web UI

Performance
• Max Throughput:
PTP: 700 Mbps IP (866 PHY)
PTMP: 500 Mbps IP (866 PHY)
• Wireless Protocols: Mimosa SRS; WiFi Interop
• Modes: PTP Backhaul (requires feature key); PTMP Client

Radio
• MIMO and Modulation: 2×2:2 MIMO OFDM, up to 256 QAM
• Bandwidth: 20/40/80 MHz channels, tunable to 5 MHz increments for Mimosa SRS and WiFi Interop mode
• Frequency Range: PTP/PTMP: 4900–6400 MHz (restricted by country of operation)
• Max Output Power: 27 dBm
• Sensitivity (MCS0):
-87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz

Power
• Max Power Consumption: 9.2 W average; 12.9 W max
• System Power Method: Passive POE (24-56 VDC)
• PoE Power Supply: Passive POE compliant, 24-56 V
Power over Ethernet supply (not included)

Physical
• Dimensions:
Height: 175 mm (6.89”)
Width: 70 mm (2.75”)
Depth: 61 mm (2.40”)
• Weight: 0.37 kg (0.82 lbs)
• RF Connector Type: Mimosa N5-X twist-on
• Enclosure Characteristics: Outdoor, die-cast aluminum, UV stabilized paint
• Mounting: Dual attached pole mount straps
• Grounding: Ground lug
• Wind Survivability: 200 km/h (125 mph)

Environmental
• Outdoor Ingress Protection Rating: IP55
• Operating Temperature: -40°C to +55°C (-40°F to 131°F)
• Operating Humidity: 5 to 100% condensing
• Operating Altitude: 4,420 m (14,500’) max
• Shock & Vibration: ETS 300-019-2-4 class 4M5

Other Specifications
• Gain: 8dBi
• Polarization: Dual-slant 45deg;
• Beamwidth, Symmetric (3 dB): 58deg;&
• Front-to-back Ratio: 21dB
• Front-to-Side Ratio (min): 21dB
• Wind Loading 2.79 kg @ 160 km/h (6.14 lbs @ 100 mph)

Specifications