Technical Specifications

Mechanical
Dimensions	212 x 205 x 187 mm (8.3 x 8.1 x 7.4″)
Weight	2.3 kg (5.07 lb)
Enclosure materials	Aluminum alloy, UV stabilized polycarbonate
Pole mount diameter	25 to 76 mm (1 to 3″) on pipe outer diameter
Wind loading	98 N at 200 km/h (22 lbf at 125 mph)
Weatherproofing	IPX6
Hardware
Processor	Quad ARM® Cortex®-A53 cores at 1.4 GHz
Memory	DDR3L 512 MB
Networking interface	(1) 2.5GbE RJ45 port (100/1000/2500)* (1) 10G SFP+ port (1/10) * Active only when SFP+ port is down.
Max. power consumption	24W
Power method	Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply	48V DC, 0.65A 2.5GbE PoE adapter (included)
Supported voltage range	44–54V DC 22–27V DC
GPS	Yes
Button	Factory reset
LEDs	Power, Ethernet, GPS
Operating temperature	-40 to 60° C (-40 to 140° F)
Operating humidity	5 to 95% noncondensing
Certifications	FCC, IC, CE
Software
Operating mode	PtMP access point
Ubiquiti specific features	Wave technology
Services	UISP, ping watchdog, NTP client, SNMP
Tools	Antenna alignment, discovery utility, ping, trace route, speed test
Network	Bridge mode
Application requirements	UISP: Version 1.5.7 and later
System
Total throughput	5.4 Gbps (2.7 Gbps duplex)
Supported clients count	15
Max. range	Connecting to a Wave Long-Range: up to 8 km Connecting to a Wave Nano: up to 5 km
Encryption	WPA2-PSK (AES)
RF
Operating frequency*	57–71 GHz *Depends on regulatory region.
Channel bandwidth	2160, 1080 MHz
Operating channels*	58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz *Depends on regulatory region.
Modulation	16QAM, QPSK
Antenna gain	24 dBi
Polarization	Vertically linear
Beamwidth	Azimuth: 3 dB 30° Elevation: 3 dB 3°
Electrical downtilt	0°

 Specifications

Mechanical
Dimensions	Ø424.4 x 166.2 mm (Ø16.7 x 6.5″)
Weight	Without mount: 2.59 kg (5.7 lb) With mount: 3.79 kg (8.4 lb)
Enclosure material	UV stabilized plastic
Mount material	Stainless steel
Pole mount diameter	25 to 76.2 mm (1 to 3″) on pipe outer diameter
Wind loading	286 N at 200 km/h (64.3 lbf at 125 mph)
Weatherproofing	IPX6
Hardware
Processor	Dual ARM® Cortex®-A53 cores at 1 GHz
Memory	DDR3L 512 MB
Networking interface	(1) GbE RJ45 port
Max. power consumption	20W
Power method	Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply	48V DC, 0.65A gigabit PoE adapter (included) Can be powered by a UISP Router or UISP Switch
Supported voltage range	44–54V DC 22–27V DC
GPS	Yes
Button	Factory reset
LEDs	Power, Ethernet, GPS, link
Operating temperature	-40 to 60° C (-40 to 140° F)
Operating humidity	5 to 95% noncondensing
Certifications	FCC, IC, CE
Software
Operating mode	PtMP station
Ubiquiti specific features	Wave AI, discovery protocol
Services	UISP, ping watchdog, NTP client, SNMP
Tools	Antenna alignment, discovery utility, ping, trace route, speed test
Network	Bridge/Router mode
Application requirements	UISP: Version 1.4.5 and later
System
Total throughput	2 Gbps (1 Gbps duplex)
Max. range	8+ km
Encryption	WPA2-PSK (AES)
RF
Operating frequency*	57–71 GHz *Depends on regulatory region.
Channel bandwidth	2160, 1080 MHz
Operating channels*	58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz *Depends on regulatory region.
Modulation	16QAM, QPSK
Antenna gain	46 dBi
Polarization	Vertically linear
Beamwidth	Azimuth: 3 dB 1° Elevation: 3 dB 1°
Back-Up RF
WiFi standard	802.11ax (WiFi 6)
Operating frequency* US/CAWorldwide	U-NII-1 5150 – 5250 MHz U-NII-2A 5250 – 5350 MHz U-NII-2C 5470 – 5725 MHz U-NII-3 5725 – 5850 MHz5150 – 5875 MHz *Depends on regulatory region.
Channel bandwidth	20, 40, 80 MHz
Modulation	BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
Antenna gain	22 dBi
Polarization	Dual-linear
Beamwidth	Azimuth: 3 dB 8° Elevation: 3 dB 8°
Cross-pol isolation	20 dB

Dual-band, 802.11ac Wave 1 access point with an omnidirectional super antenna and 3×3 MIMO functionality that can reach a 1.75 Gbps aggregate throughput rate.The Access Point AC Mesh Pro (UAP AC Mesh Pro) is a high-performance, outdoor-ready, dual-band, 802.11ac WiFi access point than can reach a 1.75 Gbps aggregate throughput rate with its 5 GHz (3×3 MIMO) and 2.4 GHz (802.11n) bands. The UAP AC Mesh Pro also features a proprietary, omnidirectional super antenna to provide exceptional 360° coverage, as well as symmetrical long-range transmission up to 183 meters. This access point is powered with 802.3af PoE and is equipped with (2) GbE RJ45 ports to support multiple high-speed LAN connections. The UAP AC Mesh Pro can be set up in minutes and fully managed with the UniFi Network web application or mobile app.

Dimensions*              322.6 x 201.5 x 1300 mm
(12.7 x 7.93 x 51.18″)
Weight**                   13.1 kg
(28.9 lb)Frequency Range     5.15 – 5.85 GHz
Gain                          22 dBi
HPOL Beamwidth     3 x 30° (6 dB)
VPOL Beamwidth     3 x 30° (6 dB)

Electrical Beamwidth   8°
Electrical Downtilt        2°
Max. VSWR               1.75:1
Polarization               Dual-Linear
Cross-Polarization Isolation   30 dB Min.
Interfaces                 (6) RP-SMA Connectors (Weatherproof )
Compatible Radio     Rocket5ac Prism, model R5AC-PRISM
Wind Loading            534 N @ 200 km/h (120 lbf @ 125 mph)
Wind Survivability      200 km/h (125 mph)
Mounting                   Universal Pole Mount, Rocket Bracket, and Weatherproof RF Connectors Included
ETSI Specification    EN 302 326 DN2
Certifications            CE, FCC, IC