1. Included One Pdu & One Shelf.
2. Reliable Structure, Static Loading Capacity: 60KG.
3. Quick and Easy Installation.
4. Fan Installed At The Top Of Cabinet.
5. Cable Entry From Top And Bottom.
6. Customization Requests Welcome.
7. Front Glass Door.
8. 2 Side Doors With Locks.

1. included one pdu & one shelf.
2. Reliable Structure, Static Loading Capacity: 60KG.
3. Quick and Easy Installation.
4. Fan Installed At The Top Of Cabinet.
5. Cable Entry From Top And Bottom.
6. Customization Requests Welcome.
7. Front Glass Door.

1. Reliable Structure, Static Loading Capacity: 60KG.
2. Quick and Easy Installation.
3. Fan Installed At Top Of Cabinet.
4. Cable Entry From Top And Bottom.
5. Customization Requests Welcome.
6. Front Glass Door.

1. Reliable Structure, Static Loading Capacity: 60KG.
2. Quick and Easy Installation.
3. Fan Installed At The Top Of Cabinet.
4. Cable Entry From Top And Bottom.
5. Customization Requests Welcome.
6. Front Glass Door.

• The cabinet adopt the double wall type design. It is composed with main body, roof, the rear panel, the side panel land the base.
• The double wall type rear panel, the dual side panel, the bolts are fixed by inside. The double wall type gate has the bikini fixing device, after closes the gate not to be able to see the bolt from outside. Leans the kneading board to cover the cabinet and the foundation, eliminated entered the cabinet by the compulsory measure weakness.
• Inside and outside kneading board (spacing 25mm) the band provides ventilates the channel, supports the cabinet internal heat change and may reduce the sunlight illumination the influence.
• The roof panel has the rain awning with the size all around stretches out 25mm and 75mm high. Which have the integrity well ventilated to clamp the trough and ensuring the exchange of the gas.
• The base may use the entire block or divide three parts of sealed panel to seal.
• The cabinet can adopt 19-inch structure to install, it can install the mounting panel or according to the custom design also.
• The natural wind cooling. The cabinet can be installed fans on the top cover and punched the hole woth dust proof cover at the bottom of two sides. The air conditioner is option.
• Front and back heavy duty metal doors are openable, also front toughened glass door with metal panel and water-proof rubber for options.
• Protection degrees: IP55
• We can design the structure as the customer requirement.

Standard and Material:

• Comply with GB / T19183 and IEC 61969.
• Surface Treatment: Degreasing, Phosphating, Powder coating.
• Material: Cold Rolled steel or Stainless steel.
• Color: RAL5012 (Top cover and base); RAL7035 (The others)

1-Double wall type for rear panel and dual side panel, the bolts can fixed from inside. Also the door with double wall type and carry the temperature fixing device, after closes the gate not to be able to see the bolt from outside.Designed with top heading board to cover the cabinet from top.

2-Inside and outside board with (spacing 25 mm), this band to provides ventilates and to supports the cabinet internal heat change and may reduce the sunlight illumination.

3-The roof panel has the rain awning that stretches all around out (from 25mm to 75mm) Which give well ventilated to clamp the trough and ensuring good exchanging of the gas.

4-The base may use the entire block or divide three parts of sealed panel to seal.

5-The cabinet can adopt 19 inch structure to install, It can install the mounting panel.

or according to the custom design also.

6- The natural wind cooling. The cabinet can be installed fans on the top cover and punched the hole with dust proof cover at the bottom of two sides.

7-Front and back heavy duty metal doors are openable,also front toughened glass door with metal panel and water-proof rubber for options.

8-Protection Degress: : IP55 EN 60529/10.91.

9-Electric: themostat controler for the fans, Cirecle brakers,Smoke detetor,Entrance guide

• The cabinet adopt the double wall type design. It is composed with main body, roof, the rear panel, the side panel land the base.
• The double wall type rear panel, the dual side panel, the bolts are fixed by inside. The double wall type gate has the bikini fixing device, after closes the gate not to be able to see the bolt from outside. Leans the kneading board to cover the cabinet and the foundation, eliminated entered the cabinet by the compulsory measure weakness.
• Inside and outside kneading board (spacing 25mm) the band provides ventilates the channel, supports the cabinet internal heat change and may reduce the sunlight illumination the influence.
• The roof panel has the rain awning with the size all around stretches out 25mm and 75mm high. Which have the integrity well ventilated to clamp the trough and ensuring the exchange of the gas.
• The base may use the entire block or divide three parts of sealed panel to seal.
• The cabinet can adopt 19-inch structure to install, it can install the mounting panel or according to the custom design also.
• The natural wind cooling. The cabinet can be installed fans on the top cover and punched the hole woth dust proof cover at the bottom of two sides. The air conditioner is option.
• Front and back heavy duty metal doors are openable, also front toughened glass door with metal panel and water-proof rubber for options.
• Protection degrees: IP55
• We can design the structure as the customer requirement.

Standard and Material:

• Comply with GB / T19183 and IEC 61969.
• Surface Treatment: Degreasing, Phosphating, Powder coating.
• Material: Cold Rolled steel or Stainless steel.
• Color: RAL5012 (Top cover and base); RAL7035 (The others)